2 rue de la Ternière
Avrillé Cedex, FRANCE
Grooved pin ISO 8744 - DIN 1471
Full-length taper grooved pin to ISO 8744 - DIN 1471, giving a zero-play interference fit, even in blind holes. Available from Ø 1.5 to 25 mm and 8 to 100 mm long, in steel, A2/A4 stainless steel, brass or aluminium. Part of our ISO and DIN grooved pin range.

They trust us
Using grooved pins - ISO 8744 / DIN 1471
The type of grooved pin you need depends on what specific purpose it will serve.
Grooved pins can have various uses in an assembly:
- Solidity: Holding two parts together thanks to their machined grooves and the pressure they exert on the hole in which they are inserted.
- Connection & rotation: Grooved pins allow for pivot movement between two elements, like in door hinges.
- Positioning: Grooved pins enable two parts to be positioned relative to each other, in order to then add another fastener, e.g. a screw.
Based on these three functions, we can recommend the type of pin best suited to your needs.
In most cases, we would recommend using ISO 8744 / DIN 1471-standard pins to meet connection needs in assemblies where one part must be able to rotate relative to another.
To ensure both parts are solidly fastened, blocking any and all degree degrees of freedom, pins with grooves along their entire length are to be used. The grooves allow the pin to fit tightly into the two parts.
Three types of pins can be used in this case:
- ISO 8739 / DIN 1470
- ISO 8740 / DIN 1473
- ISO 8744 / DIN 1471
Constant grooves, like on these ISO 8744 / DIN 1471 standard pins, allow the pin to be pre-positioned thanks to a slight bulge (a few millimetres) in its diameter. This keeps the pin in place before it is totally pressed inside.
ISO 8744 or DIN 1471-standard pins have grooves all along their length, allowing for the part to be pre-positioned in the assembly on the side where bulge diameter is smallest.
Once in place, a press is used to ensure the pin is installed snugly with the help of its grooves.
This is what makes this grooved pin different from the other two, which have constant grooves all along their length.
Manufactured in France since 1934
LGC Industries designs and produces more than one million parts every day in its own workshops. 100% of our materials are sourced within 900 km, for short supply chains and full traceability.

Ready to start your project?
Our technical team reviews your request and sends you a tailored quote.
