2 rue de la Ternière
Avrillé Cedex, FRANCE
Self-tapping threaded bushing made in France
Self-tapping inserts create strong metric internal threads in parts that are already formed: wood, wood-based panels, plastics or aluminium. The insert screws into a plain drilled hole and cuts its own mating thread. LGC Industries manufactures them under the Intervis® brand from M2.5 to M16, in steel, stainless steel and brass, for medium and high volumes.

They trust us
What is a self-tapping insert?
Self-tapping inserts are indispensable should you wish to make repairs or threads in materials that cannot be tapped.
Oftentimes in soft and medium-hard materials such as light alloys, plastics or even compressed wood, taps do not withstand repeated stresses. If a screw is tightened too forcefully or too frequently, the threads may break off, making the part unusable.
This is where the self-tapping insert (aka "threaded insert" or "threaded dowel pin") comes in!
Self-tapping inserts can be solidly anchored in the material in which they are installed, because the threaded dowel itself creates its own thread during assembly. With this type of self-tapping dowel, there is no need to drill a hole in advance, unlike conventional threaded inserts; nor to drill a hole and then tap like when installing a helicoil. This means that self-threading inserts offer increased pull-out resistance when trying to loosen.
Intervis self-tapping inserts have a standard (interior) thread as well as an external thread.
- An external thread truncation.
- Two sharp-edged slots.
You can screw the insert straight into a smooth hole drilled beforehand, just like you would with a tap.
Threaded insert, self-tapping threaded insert: advantages of Intervis®
At LGC Industries, we developed the Intervis brand - an innovative threaded insert, also known as a self-tapping bush / bushing.
The Intervis threaded insert is a practical tapping and screwing solution, allowing you to insert it directly into a pre-drilled hole. Thanks to its ability to carve its own thread into the material, self-tapping inserts guarantee additional safety and solidity.
We recommend using Intervis self-tapping inserts in your aluminium assemblies as its surface treatment eliminates the electrolytic couple between the two materials. Gang drilling machines provide an average indicator. When installing the insert, it is advisable to do a test by drilling 1/10th above or below the indicated diameter due to the particular characteristics of certain materials.
Intervis® self-tapping inserts offer several advantages, e.g.:
- They can be inserted into the material without any need for pre-tapping
- No clearance between the spacer and the part
- Excellent pull-out resistance: Intervis® inserts reach their maximum pull-out resistance at 30% to 40% overlap
- No wear from tapping
- Absolute safety during use
At LGC Industries, we offer several ranges of Intervis® self-tapping sockets available in various materials such as crude steel, chromium(VI)-free case-hardened and zinc-plated steel, brass or stainless steel.
The different types of Intervis® self tapping inserts
Intervis standard slotted self-tapping insert
The standard Intervis® slotted threaded insert can be inserted straight into a hole drilled beforehand. It functions as a tap, creating a thread in the hole by itself. This type of fastening is ideal for medium-hard materials such as light alloys, compressed woods or plastics. The installation of this self-tapping bushing is simple and effective.
Intervis self-tapping insert with 3 holes
With our low-height Intervis® self-tapping inserts, we have added three holes onto the self-tapping insert in order to facilitate evacuation of material chips / swarf when tapping the assembly material.
In short, the Intervis® 3-hole threaded insert is a practical alternative to the standard Intervis® 1-slot threaded inserts in applications involving smaller heights and thicknesses.
Want to find out more about our Intervis® self-threading sockets?
Go to our dedicated article: Everything you need to know about Intervis® threaded inserts
All of our Intervis® self-tapping inserts are available in:
- Stainless steel
- Steel
- Brass
Manufactured in France since 1934
LGC Industries designs and produces more than one million parts every day in its own workshops. 100% of our materials are sourced within 900 km, for short supply chains and full traceability.

Ready to start your project?
Our technical team reviews your request and sends you a tailored quote.
